Introduction of Clay Brick Making Machine:
Our company for the production of clay brick is representative of the current world vacuum extrusion technology more advanced models of clay brick machine, which has more than 100 years history and development experience in China and the countries in the world in general use, our equipment have the advantages of consistency output, adaptability good raw materials and pervasive strong. We have adopt an new technoloty according to users design and the actual needs of a variety of clay brick making production lines.

Theoretical Output Table of Clay Brick Making Machine:
In brick and ceramic industry, this machine is in the last section which gives the final shape to the product. It basically consists of two main units. The first unit located on the top is a double shaft de-airing mixer. It mixes and kneads the clay material. Mud is then passed through a vacuum chamber in which de-airing of the material is achieved. The vacuumed mud is then directed towards the so called lower unit. Here the squeezing and driving augers carry the mud into the machine barrel. Finally the exrusion operation is completed by forcing the mud block through the desired die shape. This machine can handle materials with moisture ratios of 20 to 25 per cent.
The double shaft de-airing mixer is a sturdy steel construction. The main body and other parts of the lower exruding machine are of heavy duty cast materials. At the outlet port of the upper unit a cutter is installed. In this system the mud is brought to the most desirable condition for de-airing. Problems of over compaction and over loading in the vacuum chamber is thus prevented. All paddles and augers are made out of wearing resistant steel. They are designed with high accuracy to operate with minimum energy consumption. Slippage of mud in the forcing paddle section and in the machine barrel is prevented by easily replacable internal steel linings. Upper and lower units are driven by two different gear boxer and motors. Also clutching systems are installed on both units. Upper and lower units could be positioned atraight or at right angle with respect to each other depending on the plant layout requirementer.
 
Description of Clay Brick Making Machine:
Vacuum crowded brick machine is hollow brick production at the main molding equipment. Both the upper and lower parts of it sealed in tandem together, the first time their superiors were stirring the mud out of the seminar, entered the vacuum chamber and in a vacuum chamber in the soil are taken from the air expected to be lower again after a screw extruder and smooth surface and the density of the mud.
 
Advantage of Clay Brick Making Machine:
Unit structure used in all the main steel casting, solid Wearable pressure is hollow brick production, shale bricks, slabs dedicated host gangue. Intelligent electronic control system: Intelligent Control Room direct air forever without plugging mud of trouble. Super housings: Siamese Steel Casting and weighing 150 gram, Steel split-type, Longkou design: the replacement of 1 to pay the higher level spiral time in 30 minutes to complete.

Export country of the Clay Brick Making Machin:
India, Vietnam, Kazakhstan , Mongolia, Ecuador, Iran, Pakistan, Australia, the Middle East and other countries and areas.

Specifications of Clay Brick Making Machine: